I cut every bob below on dry hair, nape an inch shorter than the front, so the diagonal you see in the chair is the one you’re wearing Thursday afternoon. Most angled bob haircuts land at the jaw or collarbone and need a trim every six to eight weeks, with tweaks for fine, thick, wavy, or curly hair.
1. Jaw-Length Classic Angled Bob

I start the classic angled bob, my first pick among angled bob haircuts, by cutting the nape on dry hair an inch shorter than the front. With the shears flat, I bring the line forward until the front lands at the jaw. Round and square faces wear it well with fine to thick density and 1A to 2A texture. Roll the front under with a round brush as you blow-dry. Trim every six weeks.
2. Long Angled Bob Haircuts to the Collarbone
For long angled bob haircuts, I cut the back at the shoulder on dry hair, then angle the front down to the collarbone and point cut the ends, giving an angle of over two inches. Round, square, and oval faces suit it with fine to thick density and 1A to 2A texture. Finish a smooth round-brush blow-dry with serum. Trim every eight weeks.
3. Angled Bob Featuring Curtain Bangs
Starting on dry hair, I cut the nape an inch shorter than the front, angle to the jaw, then section a triangle and cut curtain bangs from the brow to the cheekbone. That second line softens the diagonal of the angled bob. It works for round and square faces with fine to medium density and 1B to 2B texture. Use a small round brush to blow the bangs out, and trim them every five weeks.
4. Fine-Hair Angled Bob
Keeping the angle blunt is what makes an angled bob read thick on fine hair. I cut on dry hair with the shears flat, nape an inch shorter than the front, angle to the jaw, then point cut two short layers at the crown for lift. Oval and round faces with fine density and 1A to 2A texture suit it. Put mousse on damp roots before a round-brush blow-dry. Trim every six weeks.
5. Stacked-Nape Angled Bob
Graduation cut into the nape is what lifts the back of a stacked angled bob while the front falls to the jaw. On dry hair I cut the nape short, build the weight line at the occipital, and angle the front down. Fine to thick density and 1A to 2A texture work on round and square faces. Blow-dry with a round brush, turning the front under and lifting the stack. Trim every five weeks.
6. Long Angled Bob Haircuts in Layers
I keep the collarbone angle on long angled bob haircuts with layers and add movement at the front with layers from the chin. The back is cut at the shoulder on dry hair, the front angled to the collarbone, and the layers point cut from the chin down. Most face shapes can wear it in fine to medium density and 1A to 2B texture. Round-brush the ends under, then finish with a light cream. Trim every eight weeks.
7. Thick-Hair Angled Bob
Internal layers keep an angled bob on thick hair lying flat rather than flaring. After cutting the nape an inch shorter than the front on dry hair and angling to the jaw, I point cut internal layers through the sides and back, leaving the outline untouched. Any face shape works with thick density and 1A to 2B texture. Smooth with a cream and blow-dry flat using a paddle brush. Trim every six weeks.
8. Angled Bob for Women Over 50
I cut the angled bob over 50 with the front at the chin, the back at the nape, and a side swept fringe that reaches the cheekbone. On dry hair, the nape goes first, then the front is angled to the chin with point cut ends and the fringe cut from the part to the cheekbone. It works with fine to medium density and 1A to 2A texture. Blow-dry using smoothing cream and a round brush. Trim every six weeks.
9. Wavy Angled Bob Cut
Dry-cutting a wavy angled bob, I take the nape an inch shorter than the front, angle to the jaw, and point cut the ends, then bend the front pieces so the angle softens compared with a straight blowout. Round and square faces suit it with fine to medium density and 1B to 2B texture. Wave the front with a one-inch iron, keep the ends straight, and break it up with a texture spray. Trim every six weeks.
10. Long Angled Bob Haircuts Worn With a Side Part
Parting two inches off center is what pushes the longer front piece of long angled bob haircuts to one side so the angle shows from the front. I cut the back at the shoulder on dry hair and angle the front to the collarbone before setting the part. Round and square faces with fine to thick density and 1A to 2B texture wear it well. Blow-dry it smooth with a round brush and tuck the short side. Trim every eight weeks.
11. Angled Bob With a Blunt Fringe
My order here: nape an inch shorter than the front on dry hair, angle to the jaw, then the fringe straight across at the brow with the shears flat, giving a horizontal line against the diagonal of the angled bob. Oval and oblong faces with fine to medium density and 1A to 1C texture suit it. Blow the fringe down with a flat brush and the bob under with a round brush. Trim the fringe every four weeks.
12. Smooth Sleek Angled Bob
Every piece has to lie down on a sleek angled bob, since the diagonal is shown against a flat surface. I cut on dry hair with the shears flat, nape an inch shorter than the front, then angle to the jaw. It fits round and square faces with fine to thick density and 1A to 1C texture. Paddle-brush it flat, flat iron over a heat protectant, and finish with serum. Trim every six weeks.
13. Angled Bob for Women Over 60
On the angled bob over 60, I set the front at the chin, leave the nape soft instead of stacked, and point cut the ends so they keep their thickness. Everything is cut on dry hair, angled to the chin, then lightly texturized. It works with fine to medium density and 1A to 2A texture. Put mousse at the roots and blow-dry with a round brush. Trim every six weeks and gloss every eight.
14. Curly Angled Bob Cut Dry
I cut a curly angled bob dry, one curl at a time, so the angle survives when the curl springs. Curl by curl, the nape lands an inch shorter than the front, and the front is angled to the jaw. Oval and heart faces with medium to thick density and 3A to 3C texture suit it. Rake curl cream through wet hair, then diffuse on low. Trim every eight weeks.
15. Long Angled Bob Haircuts Suited to Round Faces
On a round face, I drop the front of angled bob haircuts past the chin so the diagonal leads the eye down. The back is cut at the shoulder on dry hair, the front angled to the collarbone, and a single layer point cut below the chin. It works with fine to thick density and 1A to 2B texture. Lift the crown during a smooth round-brush blow-dry. Trim every eight weeks.
16. Angled Bob With a Money Piece
Once the nape is cut an inch shorter than the front on dry hair and angled to the jaw, I lighten the two front sections to a level nine and tone beige, so the money piece lights the longest part of the angled bob. Fine to medium density and 1A to 2B texture suit it. Blow the front out with a round brush. Refresh every ten weeks.
17. Textured Angled Bob Cut
Deep point cutting through the ends gives a textured angled bob its soft diagonal. On dry hair I cut the nape an inch shorter than the front, angle to the jaw, and point cut an inch into the ends. Oval and square faces with medium to thick density and 1B to 2B texture wear it well. Rough-dry with a texture spray, then bend the ends with a flat iron. Trim every six weeks.
18. Angled Bob Paired With Side-Swept Bangs
Side swept bangs cut from the part to the cheekbone run the same way as the diagonal of this angled bob. Before the bangs, I cut the nape an inch shorter than the front on dry hair and angle to the jaw. Round and square faces with fine to medium density and 1A to 2B texture suit it. Blow the bangs across using a flat brush. Trim the bangs every five weeks.
19. Copper-Toned Angled Bob
With the nape cut an inch shorter than the front on dry hair and the line angled to the jaw, I apply a level seven copper at the root and a demi on the ends, which reads bright along the diagonal of the angled bob. It suits warm skin tones with fine to medium density. Round-brush blow-dry and finish with serum. Trim every six weeks and refresh the tone every five.
20. Long Angled Bob Haircuts Painted With Balayage
I paint balayage on long angled bob haircuts brightest at the front, where the angle runs longest. The back is cut at the shoulder on dry hair, the front angled to the collarbone, then the front pieces and ends hand painted to a level nine. It works with fine to thick density and 1A to 2B texture. Blow-dry with a round brush and finish with serum. Refresh every twelve weeks.
21. Angled Bob Suited to Square Faces
On a square face, I drop the front of angled bob haircuts below the jaw so the diagonal clears the corners. On dry hair the nape is cut an inch shorter than the front, the front angled to an inch below the jaw, and the ends point cut. Fine to thick density and 1A to 2B texture work. Roll the front under with a round brush as you blow-dry. Trim every six weeks.
22. Angled Bob Finished With a Shadow Root
For color, a level six demi goes on the root while the lengths stay level nine, keeping depth at the part and light along the angle of a blonde angled bob. The cut comes first: nape an inch shorter than the front on dry hair, angled to the jaw. Fine to medium density and 1A to 2B texture suit it. Blow-dry with a round brush. Trim every six weeks and refresh the root every ten.
23. Straight-Hair Angled Bob
Straight hair holds the diagonal of an angled bob without product, which means the cut must be clean. I cut on dry hair with the shears flat, nape an inch shorter than the front, and angle to the jaw. Round and square faces with fine to medium density and 1A to 1C texture suit it. Paddle-brush it flat, then bend the front under with a flat iron. Trim every six weeks.
24. Angled Bob in Dark Brunette
A level four demi from root to end turns this into a dark brunette angled bob with a sharp diagonal against the skin. I cut it on dry hair with the shears flat, nape an inch shorter than the front, angled to the jaw. It suits cool or neutral skin tones and fine to thick density. Paddle-brush it flat and finish with serum. Refresh the tone every eight weeks.
25. Long Angled Bob Haircuts Made to Air Dry
One layer below the chin plus a side part let angled bob haircuts air-dry, with the angle falling without a brush. I cut the back at the shoulder on dry hair, angle the front to the collarbone, and point cut that layer below the chin. Any face shape with fine to medium density and 1C to 2B texture can wear it. Work a light cream into damp hair, part it to one side, and leave it alone. Trim every eight weeks.
See also inverted bob haircuts and wavy bob haircuts.
Angled bob haircuts turn on about an inch: the nape shorter, the front to the jaw, and a round brush turning the ends under is what keeps the line. A trim every six weeks holds the angle.
























