A wavy bob cut at the jaw on dry hair takes about ten minutes to wave with a one-inch iron, and point-cut ends keep the bends separated into second-day hair. The cut does more work than the iron, though, because density decides whether wavy bob haircuts need internal layers for thick hair or a blunt line for fine hair.
1. Jaw-Line Classic Wavy Bob

I open my wavy bob haircuts with the classic wavy bob: a blunt perimeter cut on dry hair at the jaw, then point cut ends so the loose bends through the lengths separate. Oval and heart faces with fine to thick density and 1B to 2B texture suit it. Use a one-inch iron, leave the ends out, and finish with a texture spray. Trim every six weeks.
2. Short Wavy Bob Haircuts Cut Above the Chin
For short wavy bob haircuts above the chin, I leave the perimeter half an inch longer than the target, since the wave pulls it up. On dry hair the line goes at the chin, the ends are point cut, and I recheck the length once it is waved. Oval and heart faces with fine to medium density and 1C to 2B texture suit it. Use a three-quarter-inch iron, then rake through a light cream. Trim every five weeks.
3. Wavy Bob Featuring Curtain Bangs
Starting on dry hair, I cut the bob at the jaw, section a triangle at the front, and cut curtain bangs from the brow to the cheekbone, where they open at the brow and blend into the waves. Round and square faces with fine to medium density and 1B to 2B texture wear it well. Blow the bangs out with a round brush before waving the rest. Trim the bangs every five weeks.
4. Wavy Bob Cut for Fine Hair
Keeping the perimeter blunt is what makes the waves of a wavy bob read thicker on fine hair. I cut the line at the jaw on dry hair with the shears flat, then point cut two short crown layers for lift. Oval and round faces with fine density and 1A to 2A texture suit it. Put mousse on damp roots, blow-dry, then wave with a one-inch iron, leaving the ends straight. Trim every six weeks.
5. Beach Wave Bob With Point-Cut Ends
On dry hair I cut the perimeter at the chin, point cut an inch into the ends, and add face framing from the cheekbone, so texture spray grips a beach wave bob and the waves hold with no iron. Most face shapes with fine to medium density and 1C to 2B texture can wear it. Mist sea salt spray onto damp hair, scrunch, and air-dry. Trim every six weeks.
6. Wavy Bob Cut for Thick Hair
Internal layers stop a wavy bob on thick hair from stacking into a triangle. After cutting the perimeter at the jaw on dry hair, I point cut internal layers through the sides and back, leaving the outline alone. Any face shape with thick density and 1C to 2C texture works. Paddle-brush it with a smoothing cream, then wave with a one-and-a-quarter-inch iron. Trim every six weeks.
7. Soft Wavy Bob Over 50
I cut the wavy bob over 50 with the perimeter at the chin on dry hair, point cut ends, and a side swept fringe cut from the part to the cheekbone, then let soft waves do the rest. It works with fine to medium density and 1B to 2A texture. Round-brush blow-dry, bend the lengths with a one-inch iron, and brush out. Trim every six weeks.
8. Short Wavy Bob Haircuts Worn With a Side Part
Parting two inches off center is what pushes the waves of short wavy bob haircuts to one side so the volume sits over one eye. I cut the perimeter at the chin on dry hair and point cut the ends before setting the part. Round and square faces with fine to thick density and 1B to 2B texture wear it well. Wave away from the face with a one-inch iron and tuck the short side. Trim every five weeks.
9. Wavy Bob With a Blunt Fringe
My order here: bob at the jaw on dry hair, point cut ends, then the fringe straight across at the brow with the shears flat, giving a straight line over the moving texture of the wavy bob. Oval and oblong faces with fine to medium density and 1B to 2A texture suit it. Blow the fringe down with a flat brush, then wave the lengths with an iron. Trim the fringe every four weeks.
10. Collarbone-Length Wavy Lob
Cutting the line at the collarbone on dry hair gives a wavy lob room for two full bends. I point cut the ends, then add long layers from the chin. Round, square, and oval faces with fine to thick density and 1B to 2B texture suit it. Wave with a one-and-a-quarter-inch iron, switching direction each section, and finish with a light oil. Trim every eight weeks.
11. Wavy Bob Suited to Round Faces
On a round face, I cut the line of a wavy bob an inch below the chin on dry hair and keep the waves off the cheeks. The ends are point cut, and face framing starts below the cheekbone. It works with fine to thick density and 1B to 2B texture. Start the one-inch iron at the jaw, keep the top smooth, and lift the crown. Trim every six weeks.
12. Wavy Bob Over 60 With Soft Ends
On the wavy bob over 60, I set the perimeter at the chin on dry hair with point cut ends so the waves stay soft and thick, then texturize lightly through the crown. Any face shape with fine to medium density and 1B to 2A texture can wear it. Set it with velcro rollers after a blowout, or bend it with a one-inch iron and brush through. Trim every six weeks and gloss every eight.
13. Short Wavy Bob Haircuts Kept Blunt for Fine Hair
With the shears flat on dry hair, I cut short wavy bob haircuts for fine hair to a blunt line at the chin, where the ends still look full, and skip the layers. Oval and heart faces with fine density and 1B to 2A texture suit it. Blow-dry with mousse at the roots, wave with a three-quarter-inch iron, and finish with a dry texture spray. Trim every five weeks.
14. Razor-Cut Tousled Wavy Bob
Razoring through the ends gives a tousled wavy bob waves that look undone instead of set. I cut the perimeter at the jaw on dry hair, then razor the last inch of the ends and the face frame. Oval and square faces with medium to thick density and 1C to 2B texture wear it well. Rough-dry with a texture spray, wave a few random pieces with an iron, and shake it out. Trim every six weeks.
15. Wavy Bob With a Money Piece
Once the bob is cut at the jaw on dry hair and the ends point cut, I lighten the two front sections to a level nine and tone beige, so the money piece lights the front wave where it bends off the face. Fine to medium density and 1B to 2B texture suit it. Wave away from the face with a one-inch iron so the bright piece lands on the outside of the bend. Refresh every ten weeks.
16. Wavy Bob Paired With Side-Swept Bangs
Side swept bangs cut from the part to the cheekbone merge into the first wave of this wavy bob. Before the bangs, I cut the bob at the chin on dry hair and point cut the ends. Round and square faces with fine to medium density and 1B to 2B texture suit it. Blow the bangs across with a flat brush, then wave the rest. Trim the bangs every five weeks.
17. Copper-Toned Wavy Bob
With the perimeter cut at the jaw on dry hair and the ends point cut, I apply a level seven copper at the root and a demi on the ends, which shows the light and dark sides of every bend in a wavy bob. Warm skin tones with fine to medium density wear it best. Wave with a one-inch iron and add a shine serum so the color reads. Trim every six weeks and refresh the tone every five.
18. Wavy Bob Painted With Balayage
I paint balayage on wavy bob haircuts along the outside of each wave, where the bend catches the light. The perimeter is cut at the chin on dry hair and the ends point cut before I hand paint the mid-lengths and ends to a level nine. It works with fine to thick density and 1B to 2B texture. Wave with a one-inch iron in alternating directions and finish with a light oil. Refresh every twelve weeks.
19. Wavy Bob Suited to Square Faces
On a square face, I cut the line of a wavy bob an inch below the jaw on dry hair and start the waves at the cheekbone so the corners soften. The ends are point cut and soft face framing cut from the cheekbone. Fine to thick density and 1B to 2B texture work. Wave away from the face with a one-inch iron. Trim every six weeks.
20. Wavy Bob Finished With a Shadow Root
For color, a level six demi goes on the root while the lengths stay level nine, keeping depth at the part and light through the bends of a blonde wavy bob. The cut comes first: bob at the jaw on dry hair, ends point cut. Fine to medium density and 1B to 2B texture suit it. Bend it with a one-inch iron, then add texture spray. Trim every six weeks and refresh the root every ten.
21. Wavy Bob Cut for Naturally Wavy Hair
Dry-cutting naturally wavy hair lets the perimeter of a wavy bob follow the wave pattern rather than fight it. I cut the line at the chin on air-dried hair, wave by wave, then point cut the ends. Oval and heart faces with medium to thick density and 2A to 2C texture suit it. Rake curl cream through wet hair, scrunch, and diffuse or air-dry. Trim every eight weeks.
22. Wavy Bob in Dark Brunette
A level four demi from root to end gives a dark brunette wavy bob a gloss where light hits the top of each bend. I cut the perimeter at the jaw on dry hair and point cut the ends before the color. It suits cool or neutral skin tones and fine to thick density. Wave with a one-inch iron and finish with a shine serum. Refresh the tone every eight weeks.
23. Short Wavy Bob Haircuts in Layers
I cut the perimeter at the chin on dry hair, then point cut layers from the cheekbone through the back, which lifts weight out of the chin line on short wavy bob haircuts so the waves separate. Oval and square faces with medium to thick density and 1C to 2B texture suit it. Use a three-quarter-inch iron in alternating directions and break it up with texture spray. Trim every five weeks.
24. Wavy Bob Made to Air Dry
Point cut ends plus one layer below the cheekbone let a wavy bob air-dry and bend on its own. I cut the perimeter at the chin on dry hair, point cut the ends, then cut that single layer. Any face shape with fine to medium density and 1C to 2B texture can wear it. Work a light cream into damp hair, twist a few sections, and leave it alone. Trim every eight weeks.
25. Platinum Blonde Wavy Bob
Because platinum shows every bend of a wavy bob clearly, the cut has to be clean. I cut the perimeter at the jaw on dry hair with the shears flat, then lift to a level ten and tone with a violet toner. It suits cool skin tones and fine to medium density. Wave with a one-inch iron on low heat, use a bond builder, and leave out the texture spray. Retouch every five weeks.
Closely related: choppy bob haircuts and long pixie haircut.
Wavy bob haircuts sit easiest at chin to shoulder with a slight inward turn, because the 2A to 2C wave fills the shape without weight. Scrunch with cream and the ends curl under on their own.
























