Modern Shag Haircut: Point-Cut the Crown

A modern shag haircut lives or dies on the crown layers, and most of the ones I cut land at the collarbone, point cut dry so the ends still look soft on second-day hair. Fine hair gets fewer layers so the ends don’t turn see-through, while thick hair needs razored internal layers to pull out bulk.

1. Modern Shag Haircut Paired With Curtain Bangs

The modern shag haircut I cut more than any other is collarbone length with curtain bangs and crown layers I point cut instead of razor, so the ends look lived in without fraying. Working dry, I cut the perimeter to the collarbone, point cut the crown layers to four inches, and take the bangs from the brow to the cheekbone. Best on fine to medium density with 1B to 2B texture. Rough-dry using texture spray. Trim every eight weeks.

2. Soft Shag Cut With Long Layers

This soft shag holds its layers long, so the shape shows movement instead of steps. Working dry, I take the perimeter past the collarbone, point cut layers starting at the cheekbone with the shears almost vertical, and lightly texturize the crown. Best on most face shapes with fine to medium density and 1A to 2B texture. Use a round brush at the crown and let the ends air-dry. Trim every eight weeks.

3. Wolf Cut Shag

This wolf cut is the heavier take on the shag, stacking short crown layers over long lengths. Working dry, I cut the perimeter below the shoulder, point cut the crown to three inches, and razor the face frame starting at the cheekbone. Best on medium to thick density with 1B to 2C texture, and it works on oval, square, and heart faces. Push the crown up while you rough-dry with texture spray. Trim every eight weeks.

4. Shaggy Lob Cut

This shaggy lob hits the collarbone, with layers beginning at the chin and a crown that lifts without going short. Working dry, I cut the perimeter to the collarbone, point cut layers starting at the chin, and point cut the crown to five inches. Best on fine to medium density with 1A to 2B texture. Rough-dry using a light cream, then flip the ends with a flat iron. Trim every eight weeks.

5. Modern Shag Haircut Built for Fine Hair

On fine hair, this modern shag haircut keeps a solid perimeter and only a few layers, so the ends don’t turn see-through. Working dry, I cut the perimeter to the collarbone with the shears flat, point cut three crown layers, and point cut a light face frame starting at the chin. Best on fine density with 1A to 2A texture. Blow the crown up after working mousse into damp roots. Trim every six weeks.

6. Shag Cut for Thick Hair

This thick-hair shag relies on razored internal layers to pull bulk out of the sides while the perimeter stays long. Working dry, I take the perimeter past the collarbone, razor internal layers through the sides and back, and point cut the crown. Best on any face shape with thick density and 1B to 2C texture. Rough-dry using a light cream and leave the ends however they fall. Trim every eight weeks.

7. Shag Finished With Wispy Bangs

The wispy bangs on this shag are point cut deep enough to break into pieces that sit between the brows. Working dry, I cut the perimeter to the collarbone, point cut the crown layers, and cut the bangs at the brow, point cutting until they’re see-through. Best on oval and oblong faces with fine to medium density and 1A to 2A texture. Blow the bangs down using a small brush. Trim the bangs every four weeks.

8. Curly Shag Cut Dry

This curly shag gets cut dry, one curl at a time, so each layer lands where the curl actually sits. Working curl by curl, I cut the perimeter to the shoulder, take the crown short so the curl stacks, and cut the face frame starting at the cheekbone. Best on oval and heart faces with medium to thick density and 3A to 3C texture. Diffuse on low after raking curl cream through wet hair, and sleep in a satin bonnet. Trim every ten weeks.

9. Modern Shag Haircut for Clients Over 50

My modern shag haircut over 50 uses point cutting instead of a razor to keep the ends thick, with crown layers long enough to blow-dry smooth. Working dry, I cut the perimeter to the shoulder, point cut the crown layers to five inches, and point cut a side swept fringe to the cheekbone. Best on fine to medium density with 1A to 2A texture. Blow the crown up using a round brush. Trim every eight weeks.

10. Jaw-Length Short Shag

This short shag lands at the jaw, with the crown cut to three inches and the sides razored flat. Working dry, I cut the perimeter to the jaw, point cut the crown to three inches, and razor the sides to sit close. Best on oval and heart faces with fine to medium density and 1B to 2B texture. Rough-dry using texture paste, pushing the crown up and the sides down. Trim every six weeks.

11. Shag Cut With a Razor

This razor cut shag is the softest version, with each end tapered so the layers melt into each other. Working dry, I razor the perimeter at the collarbone, razor layers starting at the cheekbone, and razor the crown to four inches. Best on medium to thick density with 1B to 2B texture. Use a light cream to rough-dry, flip your head over for the crown, and finish with texture spray. Trim every eight weeks.

12. Shag Featuring Bottleneck Bangs

The bottleneck bangs on this shag stay short in the middle and flare long at the cheekbone, framing the eyes. Working dry, I cut the perimeter to the collarbone, point cut the crown layers, section a triangle, and cut the bangs short at center and long to the cheekbone. Best on oval and oblong faces with fine to medium density and 1B to 2B texture. Blow the bangs dry using a small round brush. Trim every four weeks.

13. Wavy Shag Cut

This wavy shag suits 2A to 2C hair since the layers give each wave room to sit by itself. Working dry, I cut the perimeter to the collarbone, point cut the crown layers to four inches, and razor the face frame starting at the cheekbone. Best on any face shape with fine to medium density. Scrunch sea salt spray through damp hair and let it air-dry with the crown clipped up for ten minutes. Trim every eight weeks.

14. Long Shag Cut

This long shag holds the length past the shoulder and stacks the movement around the crown and face. Working dry, I cut the perimeter past the shoulder, point cut the crown to four inches, and razor the face frame from the cheekbone down to the collarbone. Best on oval, round, and square faces with medium to thick density and 1B to 2C texture. Push the crown up while you rough-dry with texture spray. Trim every ten weeks.

15. Modern Shag Haircut Parted to the Side

This modern shag haircut with a side part puts the crown layers on the heavy side, so they fall as a sweep instead of straight down. Working dry, I cut the perimeter to the collarbone, point cut the crown layers, razor the face frame starting at the chin, and part two inches off center. Best on fine to thick density with 1A to 2B texture. Rough-dry using texture spray, then push the heavy side back. Trim every eight weeks.

16. Shag Featuring a Money Piece

The money piece on this shag brightens the face frame while the layers stay dark. Working dry, I cut the perimeter to the collarbone, point cut the crown layers, razor the face frame starting at the cheekbone, then lighten the two front sections to a level nine and tone them beige. Best on fine to medium density with 1A to 2B texture. Rough-dry and blow the front pieces back off the face. Refresh every ten weeks.

17. Shullet Cut

This shullet keeps short sides and a long back, with the crown sitting in between. Working dry, I cut the sides scissor over comb, point cut the crown to four inches, and razor the back past the shoulder. Best on oval and square faces with medium to thick density and 1B to 2C texture. Push the crown up while you rough-dry with texture paste. Trim the sides every five weeks.

18. Shag Cut for Straight Hair

This straight-hair shag needs bent ends, or the layers line up in rows. Working dry, I cut the perimeter to the collarbone, point cut the crown layers, and point cut deep into the face frame starting at the cheekbone. Best on any face shape with fine to medium density and 1A to 1C texture. Blow the crown up, bend the ends out with a flat iron, and finish with texture paste. Trim every eight weeks.

19. Seventies Shag Cut

This seventies shag carries a center part, a short crown, and a face frame that curves back off the cheekbone. Working dry, I take the perimeter past the collarbone, point cut the crown to three inches, and razor the face frame in a curve starting at the cheekbone. Best on oval and heart faces with medium to thick density and 1B to 2B texture. Blow the face frame back using a round brush. Trim every eight weeks.

20. Modern Shag Haircut Finished With Balayage

The balayage on this shag tracks the layers, giving each piece its own bright end. Working dry, I cut the perimeter to the collarbone, point cut the crown layers, razor the face frame starting at the cheekbone, then hand paint the final three inches of each layer to a level nine. Best on fine to thick density with 1B to 2B texture. Rough-dry using texture spray. Refresh every twelve weeks.

21. Shag Finished With Side Swept Bangs

The side swept bangs on this shag run from the part to the cheekbone and blend into the face frame. Working dry, I cut the perimeter to the collarbone, point cut the crown layers, then take the bangs from the part to the cheekbone and connect them into the face frame. Best on round and square faces with fine to medium density and 1A to 2B texture. Blow the bangs across using a flat brush. Trim the bangs every five weeks.

22. Copper-Toned Shag

This copper shag shows off every layer, since light hits each end a little differently. Working dry, I cut the perimeter to the collarbone, point cut the crown layers, razor the face frame starting at the cheekbone, then apply a level seven copper root to end. Best on fine to medium density with warm skin tones. Rough-dry using texture spray, then finish the ends with serum. Refresh the tone every five weeks.

23. Shag Featuring a Full Fringe

The full fringe on this shag is cut at the brow and point cut to move with the rest of the layers. Working dry, I cut the fringe at the brow, then point cut the crown layers and razor the face frame starting at the cheekbone. Best on oval and oblong faces with medium to thick density and 1A to 2A texture. Rough-dry everything else and blow the fringe down. Trim the fringe every four weeks.

24. Bixie Shag Cut

This bixie is a shag that lands between a bob and a pixie, with the perimeter at the jaw and enough crown length to move around. Working dry, I cut the perimeter to the jaw, point cut the crown to four inches, razor the sides flat, and take the nape short. Best on oval and heart faces with fine to medium density and 1B to 2B texture. Rough-dry using texture paste. Trim every six weeks.

25. Modern Shag Haircut for Clients Over 60

My modern shag haircut over 60 keeps five-inch crown layers and a face frame at the chin, so the shape stays soft and blow-dries in ten minutes. Working dry, I cut the perimeter to the shoulder, point cut the crown and the face frame, then texturize the ends. Best on fine to medium density with 1A to 2A texture. Use mousse and blow the crown up. Trim every eight weeks and gloss every eight.

Worth a look next: curly shag haircut and soft shag haircut.

A modern shag haircut holds from the point-cut crown layers around four inches, because that is what gives lift that survives second-day hair with one pass of texture spray. The collarbone perimeter keeps it from reading too short.

Trophywifestyle
🛋️ Passionate about home decor, fashion, interior design, and exploring the world 🌎 Join me as I curate stylish spaces and seek out adventure!
Scroll to Top